| About |
|---|
| Product Description | |
|---|---|
| Supplier | British Petroleum |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.895 | g/cm³ | ASTM D-4883 |
| Melt flow rate | |||
| 230℃,2.16kg | 20 | g/10min | ASTM D-1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 162 | ℃ | ASTM D-3418 |
| Crystallization temperature | 118 | ℃ | ASTM D-3418 |
| Hot deformation temperature | |||
| 0.46MPa | 90 | ℃ | ASTM D-648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| elongation at yield | 11 | % | ASTM D-638 |
| Bending modulus | 1040 | MPa | ASTM D-790A |
| IZOD Notch Impact Strength | 2.62 | ft-lb/in | ASTM D-256 |
| -30℃ | 0.918 | ft-lb/in | ASTM D-256 |
| hardness | 64 | ASTM D-2240 | |
| Yield tensile strength | 22.1 | MPa | ASTM D-638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |