| About |
|---|
| The FC/ht Series is your highly transparent material solution for applications with food contact. The series is characterized, among other things, by its excellent adhesion to PP. Typical applications Function and design elements Grip applications Household articles Packaging (for food and careproducts) Razors Seals Toothbrushes Toys Material advantages Adhesion to PP Code of Federal Regulations, Title 21 (CFR 21) “FDA” EN71/3 Excellent processing behavior Excellent transparency Regulation (EU) No. 10/2011 Smooth, non-tacky feel Various color options andeffects available (incl. transparent colors, metallic & pearlescent effect)&& |
| Product Description | |
|---|---|
| Supplier | KRAIBURG |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Food contact compliance,Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.880 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 2.50 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 550 | % | ISO 37 |
| tear strength | 6.5 | kN/m | ISO 34-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 30 | ISO 7619 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 2000 µm | 11 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60 to 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 180 | °C | |
| Barrel middle temperature | 200 | °C | |
| Barrel front temperature | 220 | °C | |
| Mold temperature | 50 to 60 | °C | |
| Injection pressure | 20.0 to 100 | MPa | |
| Back pressure | 2.00 to 10.0 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type S2, 7.9 in/min |
| 3. Method Bb, Angle (Nicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |