| About |
|---|
| Thermoset Plastics 210 is an Epoxy; Epoxide (Epoxy) material. It is available in North America. Primary attribute of Thermoset Plastics 210: Good Adhesion. Typical applications include: Adhesives/Tapes Tools&& |
| Product Description | |
|---|---|
| Supplier | Lord |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Machinable,Good bond,Fast Cure |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.89 | g/cm³ | ASTM D1895 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| resin | 按重量计算的混合比: 2.0 按容量计算的混合比: 2.0 | ||
| Hardening method | 按重量计算的混合比: 1.0 按容量计算的混合比: 1.0 | ||
| stripping time | |||
| 25℃ | 30 to 60 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 70 | ASTM D2240 | |
| tensile strength | |||
| yield | 15.2 | MPa | ASTM D638 |
| bending strength | |||
| yield | 28.3 | MPa | ASTM D790 |
| compressive strength | 27.6 | MPa | ASTM D695 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |