Thermoset Plastics 340 No.67

About
Thermoset Plastics 340 No.67 is an Epoxy; Epoxide (Epoxy) material filled with filler. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics 340 No.67 are: Conductive Insulating Typical application of Thermoset Plastics 340 No.67: Wire & Cable&&

Product Description
Supplier	Lord
Generic	环氧树脂
Material Status	Commercial: Active
Features	Thermal conductivity,Insulation
Availabilitys	North America
Process Methods	casting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.16	g/cm³	ASTM D792
Water absorption rate
24hr	0.080	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	13	J/m	ASTM D256

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	5.0E+16	ohms·cm	ASTM D257
Dielectric constant
1 MHz	4.40		ASTM D150
Dissipation factor
1 MHz	0.031		ASTM D150

THERMAL	Nominal value	Unit	Test method
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 6.0

Thermosetting mixed viscosity	Nominal value	Unit	Test method
25℃	70000	cP	ASTM D2393
stripping time
100℃	120	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	95		ASTM D2240
tensile strength
yield	50.3	MPa	ASTM D638
Tensile strain
yield	2.7	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.