| About |
|---|
| Thermoset Plastics SC-104是一种硅酮 (Silicone)材料,。 该产品在北美洲有供货,加工方式为:包封或浇铸。 Thermoset Plastics SC-104的主要特性有: 阻燃/额定火焰 传导性 绝缘 Thermoset Plastics SC-104的典型应用领域为:电线电缆&& |
| Product Description | |
|---|---|
| Supplier | Lord |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Thermal conductivity,Insulation,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.09 | g/cm³ | ASTM D792 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 2.2E+15 | ohms·cm | ASTM D257 |
| Dielectric constant | ASTM D150 | ||
| 100 Hz | 3.10 | ASTM D150 | |
| 100 kHz | 3.06 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 100 Hz | 7.5E-3 | ASTM D150 | |
| 100 kHz | 1.8E-3 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 7000 | cP | ASTM D2393 |
| stripping time | |||
| 25℃ | 1400 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 67 | ASTM D2240 | |
| tensile strength | |||
| yield | 3.31 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 120 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.85 | W/m/K | ASTM C177 |
| Thermosetting components | |||
| resin | 按重量计算的混合比: 1.0 | ||
| Hardening method | 按重量计算的混合比: 1.0 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |