| About |
|---|
| Thermovin™ 170-H8是一种热塑性硫化橡胶(TPV)材料,含有的填充物为10% 矿物填料。 该产品在北美洲有供货,。 Thermovin™ 170-H8的典型应用领域为:汽车行业&& |
| Product Description | |
|---|---|
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | The fouling resistance,Mildew |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 12.5 | MPa | ASTM D412A |
| Tensile strain | |||
| fracture | 370 | % | ASTM D412A |
| tear strength | 33 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 70℃，22 hr | 40 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature flexibility | |||
| -30℃，6.00 mm | No cracks | GM 9503P |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Arizona Weathering | 0.290 | ||
| Florida Weathering（Delta E） | 2.12 | ||
| Fungal Resistance | Pass | GM 9328P | |
| Humidity resistance | |||
| High Temperature | Pass | GM 9329P | |
| Pink Stain | No stain | GM 9303P | |
| Volatile loss | |||
| 105℃ | 2.0 | % | ASTM D1203 |
| Weathering resistance | 0.430 | SAE J1960 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |