Thermovin™ 170 H8

About
Thermovin™ 170 H8是一种热塑性硫化橡胶(TPV)材料,含有的填充物为10% 矿物填料。该产品在北美洲有供货,加工方式为:挤出。 Thermovin™ 170 H8的典型应用领域为:汽车行业&&

Product Description
Generic	TPV
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 15 seconds	64		ISO 868
tensile strength
fracture	12.6	MPa	ISO 527-2/1A/500
Tensile strain
fracture	370	%	ISO 527-2/1A/500

elastic body	Nominal value	Unit	Test method
tear strength	33	kN/m	ISO 34-1
Compression deformation			ISO 815
22℃，72 hr	39	%	ISO 815
70℃，22 hr	46	%	ISO 815

THERMAL	Nominal value	Unit	Test method
Low temperature flexibility	No Cracks		SAE J323

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength in air (168 hr)	-4.0	%	ISO 188
Change in Tensile Strain at Break in Air（168 hr）	-7.3	%	ISO 188
The rate of change of Shore hardness in air
168 hr	-3.4		ISO 188

Supplementary information	Nominal value	Unit	Test method
Volatile loss	0.90	%	ISO 176
Weathering resistance
Delta E	2.12
Delta E	0.430		ISO 4892-2
Weathering resistance	2.12		GB/T 2411

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.