TIPELIN® 7111S

About
Bimodal HDPE for sheet extrusion and blow moulding TIPELIN 7111S is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for sheet extrusion and blow moulding of products with high stiffness, excellent environmental stress crack resistance, full notched creep behavior and improved long-term color stability. The grade contains antioxidants and acid scavengers. TIPELIN 7111S is recommended for the extrusion of sheets of industrial parts and consumer packaging as well, highly recommended in cases when better colour stability and lower yellowness value of the product is needed. TIPELIN 7111S is also recommended for non-pressure pipe extrusion and for blow moulding of jerry cans for the packaging even of aggressive industrial chemicals. TIPELIN 7111S is suitable for food contact, for manufacturing of toys. The product complies with Food Contact and Toy Safety Regulations. Receiving of certifications is in progress.&&

About

Bimodal HDPE for sheet extrusion and blow moulding TIPELIN 7111S is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for sheet extrusion and blow moulding of products with high stiffness, excellent environmental stress crack resistance, full notched creep behavior and improved long-term color stability. The grade contains antioxidants and acid scavengers. TIPELIN 7111S is recommended for the extrusion of sheets of industrial parts and consumer packaging as well, highly recommended in cases when better colour stability and lower yellowness value of the product is needed. TIPELIN 7111S is also recommended for non-pressure pipe extrusion and for blow moulding of jerry cans for the packaging even of aggressive industrial chemicals. TIPELIN 7111S is suitable for food contact, for manufacturing of toys. The product complies with Food Contact and Toy Safety Regulations. Receiving of certifications is in progress.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Renewable resources,Food contact compliance,Good color stability,Inoxidizability,Copolymer,High density,Butylene copolymer,Bimodal molecular weight distribution,High ESCR
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	0.12	g/10min	ISO 1133
190℃，21.6kg	13	g/10min	ISO 1133
190℃，5.0kg	0.50	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50	> 10000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	63		ISO 868
Bending modulus
injection molding	1350	MPa	ISO 178

film	Nominal value	Unit	Test method
film thickness
test	70	µm
tensile strength
Fracture, 70 µ m, blow molded film	35.0	MPa	ISO 527-3
Yield, 70 µ m, blow molded film	25.0	MPa	ISO 527-3
Tensile strain
Fracture, 70 µ m, blow molded film	1300	%	ISO 527-3
Yield, 70 µ m, blow molded film	13	%	ISO 527-3

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	18	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	125	℃	ISO 306/A120
Oxygen sensing time
200℃	120	min	EN 728

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.