| About |
|---|
| TIPP TI-640是一种用于挤出成型的聚丙烯，尤其是薄膜和片材，同时具有优异的透明度和高冲击强度。 它具有良好的加工性，高透明度，优异的冲击强度，良好的耐化学性和抗应力白化性。它可用于一般CPP薄膜，食品包装，蒸煮袋和装饰膜。 它是一种“不含邻苯二甲酸盐”的树脂。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,High impact resistance,Solvent resistance,High ESCR |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.9 | g/cm³ | ASTM D792 |
| Melt Flow Rate | 5.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 24 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | >500 | % | ASTM D638 |
| Bending modulus | 830 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 74 | J/m | ASTM D256 |
| DuPont Impact Strength | |||
| 23℃ | >19.6 | N·m | ASTM D2794 |
| 0℃ | 1.8 | N·m | ASTM D2794 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa | 85 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 1 mm | <1 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |