| About |
|---|
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Solvent resistance,Gamma radiation,Excellent Processability,Good Clarity,High impact resistance |
| Availabilitys | North America,Europe,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 30 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield yld | 24.0 | MPa | ASTM D638 |
| Tensile Strain | |||
| Broken BRK | > 100 | % | ASTM D638 |
| Flexural Modulus | 960 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 34 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 85.0 | ℃ | ASTM D648 |
| OPTICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 1000 µm | 8.0 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |