TIPPLEN® H 781 F

About
TIPPLEN H 781 F is a homopolymer polypropylene with high molecular weight and very good mechanical properties. The product shows excellent processability in extrusion applications. TIPPLEN H 781 F is recommended for extrusion of sheets, profiles, straps, and small diameter pipes such as refills for ballpoint pens, straws, etc. Furthermore it is also recommended for injection moulding of technical items such as cops, spools. TIPPLEN H 781 F is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TIPPLEN H 781 F is a homopolymer polypropylene with high molecular weight and very good mechanical properties. The product shows excellent processability in extrusion applications. TIPPLEN H 781 F is recommended for extrusion of sheets, profiles, straps, and small diameter pipes such as refills for ballpoint pens, straws, etc. Furthermore it is also recommended for injection moulding of technical items such as cops, spools. TIPPLEN H 781 F is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Renewable resources,Food contact compliance,High molecular weight,Homopolymer
Availabilitys	Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	0.70	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	13	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	104	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1550	MPa	ISO 527-2
tensile strength
Yield, injection molding	35.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	11	%	ISO 527-2
Bending modulus
injection molding	1750	MPa	ISO 178
Rockwell hardness
R-level	93		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 245	°C
Melt temperature	190 to 245	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.