TIPPLEN® K 499

About
TIPPLEN K 499 is an impact copolymer polypropylene for injection moulding. The product offers good flow, high impact strength and stiffness due to the ethylene content. TIPPLEN K 499 is recommended for automotive components, dashboards, cooling water compensation reservoirs, door trim panels, luggage compartment trims and battery cases, crates, boxes. TIPPLEN K 499 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TIPPLEN K 499 is an impact copolymer polypropylene for injection moulding. The product offers good flow, high impact strength and stiffness due to the ethylene content. TIPPLEN K 499 is recommended for automotive components, dashboards, cooling water compensation reservoirs, door trim panels, luggage compartment trims and battery cases, crates, boxes. TIPPLEN K 499 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Renewable resources,Good liquidity,Food contact compliance,Impact copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	6.5	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/A
-20 ℃, injection molding	5.0	kJ/m²	ISO 180-A
23 ℃, injection molding	12	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1300	MPa	ISO 527-2
tensile strength
Yield, injection molding	28.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	6.0	%	ISO 527-2
Bending modulus
injection molding	1400	MPa	ISO 178
Rockwell hardness
R-level	83		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.