TIPPLEN® K 693

About
TIPPLEN K 693 is a high molecular weight impact copolymer polypropylene for the extrusion and injection moulding applications. TIPPLEN K 693 offers excellent impact strength, good stiffness and excellent processability. TIPPLEN K 693 is recommended for medium-low weight corrugated cardboards, blow moulded bottles. This grade is also recommended for heavy-duty packaging and large containers. TIPPLEN K 693 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TIPPLEN K 693 is a high molecular weight impact copolymer polypropylene for the extrusion and injection moulding applications. TIPPLEN K 693 offers excellent impact strength, good stiffness and excellent processability. TIPPLEN K 693 is recommended for medium-low weight corrugated cardboards, blow moulded bottles. This grade is also recommended for heavy-duty packaging and large containers. TIPPLEN K 693 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Renewable resources,Food contact compliance,High molecular weight,Impact copolymer
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/A
-20 ℃, injection molding	6.0	kJ/m²	ISO 180-A
23 ℃, injection molding	25	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	88.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1350	MPa	ISO 527-2
tensile strength
Yield, injection molding	29.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	8.0	%	ISO 527-2
Bending modulus
injection molding	1450	MPa	ISO 178
Rockwell hardness
R-level	79		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 240	°C
Melt temperature	190 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.