| About |
|---|
| TIPPLEN R 1059 A is a random copolymer polypropylene with high flow properties for injection moulding applications for high speed injection moulding machines. The grade contains nucleating and antistatic agent and made with special optical additive. The product shows excellent transparency and gloss. TIPPLEN R 1059 A is suitable for replacement of PVC, PS and PET. TIPPLEN R 1059 A is recommended for injection moulding for the production of household articles, containers and thin-walled packaging for cosmetics, toiletries, herbs, confectionery, where the higher gas-permeability is no problem. It is applicable for injection moulding of transparent food containers, which can use in microwave oven. TIPPLEN R 1059 A is suitable for food contact and for manufacturing of toys. The product complies with Food Contact and Toy Safety Regulations.&& |
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,High liquidity,Renewable resources,Optical performance,Nucleation,Quick molding cycle,Permeability,Food contact compliance,Random copolymer,Antistatic property |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 85 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23 ℃, injection molding | 4.0 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 89.0 | ℃ | ISO 75-2/B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| injection molding | 1150 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, injection molding | 31.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, injection molding | 12 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 1250 | MPa | ISO 178 |
| Rockwell hardness | |||
| R-level | 87 | ISO 2039-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 185 to 230 | °C | |
| Notes |
|---|
| 1. Optical |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |