TIPPLEN® R 780

About
TIPELIN 7111S is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for sheet extrusion and blow moulding of products with high stiffness, excellent environmental stress crack resistance, full notched creep behavior and improved long-term color stability. The grade contains antioxidants and acid scavengers. TIPELIN 7111S is recommended for the extrusion of sheets of industrial parts and consumer packaging as well, highly recommended in cases when better colour stability and lower yellowness value of the product is needed. TIPELIN 7111S is also recommended for non-pressure pipe extrusion and for blow moulding of jerry cans for the packaging even of aggressive industrial chemicals. TIPELIN 7111S is suitable for food contact, for manufacturing of toys. The product complies with Food Contact and Toy Safety Regulations.&&

About

TIPELIN 7111S is a high density bimodal polyethylene copolymer (with butene-1 as comonomer) intended for sheet extrusion and blow moulding of products with high stiffness, excellent environmental stress crack resistance, full notched creep behavior and improved long-term color stability. The grade contains antioxidants and acid scavengers. TIPELIN 7111S is recommended for the extrusion of sheets of industrial parts and consumer packaging as well, highly recommended in cases when better colour stability and lower yellowness value of the product is needed. TIPELIN 7111S is also recommended for non-pressure pipe extrusion and for blow moulding of jerry cans for the packaging even of aggressive industrial chemicals. TIPELIN 7111S is suitable for food contact, for manufacturing of toys. The product complies with Food Contact and Toy Safety Regulations.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good flexibility,Renewable resources,Food contact compliance,High Heat Resistance,Ultra high molecular weight,Random copolymer
Availabilitys	Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	0.50	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	22	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	82.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1000	MPa	ISO 527-2
tensile strength
Yield, injection molding	30.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	12	%	ISO 527-2
Bending modulus
injection molding	1050	MPa	ISO 178
Rockwell hardness
R-level	75		ISO 2039-2

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	185 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.