Tislamid® PA66 PA66 50 GFR MoS

About
Tislamid® PA66 PA66 50 GFR MoS is a Polyamide 66 (Nylon 66) material filled with 50% glass fiber. It is available in Africa & Middle East or Europe for injection molding. Primary attribute of Tislamid® PA66 PA66 50 GFR MoS: Lubricated.&&

Product Description
Generic	PA66
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.51	g/cm³	ISO 1183
Shrinkage rate	0.010	%
Water absorption rate
Equilibrium, 23 ℃, 50% RH	< 2.0	%	ISO 62
Ash Content	50	%	ISO 3451

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	11	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Melting temperature	255 to 260	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	85		ISO 868
tensile strength			ISO 527-2
yield	151	MPa	ISO 527-2
fracture	151	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	0.30	%	ISO 527-2
fracture	0.30	%	ISO 527-2

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	110 to 120	°C
Drying time	3.0 to 4.0	hr
Barrel rear temperature	260 to 280	°C
Barrel middle temperature	260 to 280	°C
Barrel front temperature	260 to 280	°C
Nozzle temperature	250 to 270	°C
Processing (melt) temperature	260 to 290	°C
Mold temperature	75 to 85	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.