TITANPRO® SM198

About
Polypropylene random copolymer. Titanpro SM198 is a clarified grade designed for high transparency articles. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and c)3.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1. APPLICATIONS Injection and extrusion blow molding containers. Extruded sheet for thermoformed containers and lids, etc. Multilayer coextruded structures and sheet. Injection molded articles requiring high toughness. ADVANTAGES Superior clarity. Low odour & taste. Hot fillable. Good rigidity and impact resistance. Cycle time reduction with low processing melt temperature. Utilities cost saving and process versatility. FABRICATION Equipment – general injection, extrusion blow molding, sheet extrusion and thermoforming machines. Techniques – standard processing.&&

About

Polypropylene random copolymer. Titanpro SM198 is a clarified grade designed for high transparency articles. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and c)3.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1. APPLICATIONS Injection and extrusion blow molding containers. Extruded sheet for thermoformed containers and lids, etc. Multilayer coextruded structures and sheet. Injection molded articles requiring high toughness. ADVANTAGES Superior clarity. Low odour & taste. Hot fillable. Good rigidity and impact resistance. Cycle time reduction with low processing melt temperature. Utilities cost saving and process versatility. FABRICATION Equipment – general injection, extrusion blow molding, sheet extrusion and thermoforming machines. Techniques – standard processing.&&

Product Description
Supplier	LOTTE
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,Good surface appearance,High liquidity,Food contact compliance,Good color stability,Random copolymer,Low temperature toughness
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	1.6	g/10min	ASTM D1238
Water absorption rate
24hr	0.020	%	ASTM D570
Shrinkage rate	1.3 to 1.4	%

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	330	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	77.0	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	77		ASTM D785
tensile strength
yield	28.4	MPa	ASTM D638
Tensile strain
yield	14	%	ASTM D638
Bending modulus	1080	MPa	ASTM D790B

Notes
1. CAS# 9010-79-1
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.