TITANPRO® SM498

About
Polypropylene random copolymer. Titanpro SM498 is a clarified grade designed for high transparency articles. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food Contact use. TSCA Registry: CAS# 9010-79-1 APPLICATIONS High clarity oriented PP bottles for hot filled applications, moisture sensitive packaging, baby feeding bottles, toiletries and detergent packaging, etc. High transparent thin walled containers, storage containers, large particles, housewares. ADVANTAGES Excellent clarity. Good balance of rigidity and impact resistance. Excellent moisture barrier. Cycle time reduction with low processing melt temperature. Utilities cost saving. Suitable for hot filling and thin walled products. FABRICATION Equipment – injection stretch blow molding (ISBM) machine, injection molding machine. Techniques – standard processing.&&

About

Polypropylene random copolymer. Titanpro SM498 is a clarified grade designed for high transparency articles. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food Contact use. TSCA Registry: CAS# 9010-79-1 APPLICATIONS High clarity oriented PP bottles for hot filled applications, moisture sensitive packaging, baby feeding bottles, toiletries and detergent packaging, etc. High transparent thin walled containers, storage containers, large particles, housewares. ADVANTAGES Excellent clarity. Good balance of rigidity and impact resistance. Excellent moisture barrier. Cycle time reduction with low processing melt temperature. Utilities cost saving. Suitable for hot filling and thin walled products. FABRICATION Equipment – injection stretch blow molding (ISBM) machine, injection molding machine. Techniques – standard processing.&&

Product Description
Supplier	LOTTE
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,High impact resistance,Quick molding cycle,Food contact compliance,Moisture resistance,Random copolymer
Availabilitys	North America
Process Methods	Injection Stretch Blow Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238
Shrinkage rate
MD	1.3 to 1.4	%
Water absorption rate
24hr	0.020	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	59	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648

Supplementary information	Nominal value	Unit	Test method
CAS Number	9010-79-1

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ASTM D785
tensile strength
yield	29.4	MPa	ASTM D638
Tensile strain
yield	10	%	ASTM D638
Bending modulus	1270	MPa	ASTM D790B

Notes
1. CAS# 9010-79-1
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.