| About |
|---|
| Titanvene™ HD5740UA Titanvene™ HD5740UA is an ultra violet (UV) light stabilised high density polyethylene copolymer with a narrow molecular weight distribution, specially developed for injection moulding of heavy duty articles. Titanvene™ HD5740UA is characterised by its high rigidity, high impact resistance (especially for low temperature) and high weathering resistance. Applications Titanvene™ HD5740UA is designed for: Large dustbin and pails. Fish crates/pallet boxes Technical parts. Recommended Processing Conditions Titanvene™ HD5740UA can be easily processed on normal polyethylene injection moulding machines at temperatures in the range of 200°C to 240°C. Food Contact Compliance Titanvene™ HD5740UA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.&&Titanvene™ HD5740UA Titanvene™ HD5740UA is an ultra violet (UV) light stabilised high density polyethylene copolymer with a narrow molecular weight distribution, specially developed for injection moulding of heavy duty articles. Titanvene™ HD5740UA is characterised by its high rigidity, high impact resistance (especially for low temperature) and high weathering resistance. Titanvene™ HD5740UA is designed for: Caps and Closure Large dustbin and pails Fish crates/pallet boxes Technical parts&& |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,High impact resistance,Food contact compliance,Weight distribution |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.955 | g/cm³ | ISO 1183/D |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | 9.00 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 27.0 | MPa | ISO 527-2/2 |
| Tensile strain | |||
| fracture | 2200 | % | ISO 527-2/2 |
| Bending modulus | 1300 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 9.0 | kJ/m² | ISO 179-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ISO 306 |
| Melting temperature | |||
| DSC | 132 | ℃ | ISO 3146 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 200 to 240 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Condition 4 |
| 3. Speed C |
| 4. Method C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |