About |
---|
Titanvene™ LL0209SC Titanvene™ LL0209SC is a linear low density polyethylene for high clarity film application. Titanvene™ LL0209SC is characterized by excellent transparency, low gel content, good process ability, and good mechanical properties with low blocking force and high slip. Applications Industrial packaging Shopping bags Food packaging Rice Bag Transparent Film Garment Sack Recommended Processing Conditions Titanvene™ LL0209SC can be easily processed on normal polyethylene blow film machines at temperatures in the range of 170°C to 200°C. Food Contact Compliance Titanvene™ LL0209SC can be used in food contact applications. Please contact your nearest PT. Lotte Chemical TITAN Nusantara representative for more detail of food contact compliance statements for the specific grade.&&Titanvene™ LL0209SC Titanvene™ LL0209SC is a linear low density polyethylene for high clarity film application. Titanvene™ LL0209SC is characterized by excellent transparency, low gel content, good process ability, and good mechanical properties with low blocking force and high slip. Applications Titanvene™ LL0209SC is typically used for : Industrial Packaging – Shopping Bags Food Packaging – Rice Bag Transparent Film – Garment Sack&& |
Product Description | |
---|---|
Generic | Linear low density polyethylene |
Material Status | Commercial: Active |
Features | Excellent Processability,Good Clarity,Smoothness,Low speed solidification point,Food contact compliance |
Availabilitys | Asia Pacific |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.920 | g/cm³ | ISO 1183/D |
Melt Flow Rate | |||
190℃,2.16kg | 1.0 | g/10min | ISO 1133 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
friction coefficient | 0.14 | BS 2782 |
film | Nominal value | Unit | Test method |
---|---|---|---|
film thickness | |||
test | 38 | µm | |
tensile strength | ISO 1184 | ||
MD, yield, 38 µ m, blow molded film | 11.0 | MPa | ISO 1184 |
TD, yield, 38 µ m, blow molded film | 11.0 | MPa | ISO 1184 |
Tensile strain | ISO 1184 | ||
MD, fracture, 38 µ m, blow molded film | 750 | % | ISO 1184 |
TD, fracture, 38 µ m, blow molded film | 800 | % | ISO 1184 |
Drop hammer impact | |||
38 µ m, blow molded film | 130 | g | ISO 7765-1/A |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | 100 | ℃ | ISO 306 |
Melting temperature | |||
DSC | 122 | ℃ | ISO 3146 |
optical performance | Nominal value | Unit | Test method |
---|---|---|---|
gloss | 50 | ASTM D2457 | |
transparency | 70.0 | ASTM D1746 | |
Haze | 14 | % | ASTM D1003 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. Condition 4 |
3. Method 824A |
4. BUR 2:1 |
5. Speed 1 |
6. Method C |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |