| About |
|---|
| Titanvene™ LL3840UA Titanvene™ LL3840UA is a medium density polyethylene, which has been specially developed for manufacturing large containers. Titanvene™ LL3840UA offers excellent UV light protection for outdoor exposure with high levels of UV light radiation where the use of inorganic pigments or carbon black is normally recommended. Applications Titanvene™ LL3840UA is designed for large rotational moulding containers, traffic cone and garbage bin. Recommended Processing Conditions Titanvene™ LL3840UA can be easily processed on normal polyethylene rotational moulding machines at temperatures in the range of 180°C to 230°C. Food Contact Compliance Titanvene™ LL3840UA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.&&Titanvene™ LL3840UA Titanvene™ LL3840UA is a medium density polyethylene, which has been specially developed for manufacturing large containers. Titanvene™ LL3840UA offers excellent UV light protection for outdoor exposure with high levels of UV light radiation where the use of inorganic pigments or carbon black is normally recommended. Applications Titanvene™ LL3840UA is designed for large rotational moulding containers, traffic cone and garbage bin.&& |
| Product Description | |
|---|---|
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Food contact compliance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.936 | g/cm³ | ISO 1183/D |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | 300 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 17.0 | MPa | ISO 527-2/2 |
| Tensile strain | |||
| fracture | 1600 | % | ISO 527-2/2 |
| Bending modulus | 1000 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 12 | kJ/m² | ISO 179-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 117 | ℃ | ISO 306 |
| Melting temperature | |||
| DSC | 125 | ℃ | ISO 3146 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 180 to 230 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Condition 4 |
| 3. Speed C |
| 4. Method C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |