TITANZEX® HM5000

About
HM5000 is a high density polyethylene for extrusion monofilament. HM5000 meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 3.1a & 3.2a APPLICATIONS: Yarn, Ropes, Fishing nets. Characteristics: Excellent processability, high stiffness, high draw down capability.&&

Product Description
Supplier	LOTTE
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good dissection,High density
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.951	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	30.0	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	200	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	126	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	62		ASTM D2240
tensile strength			ASTM D638
yield	25.5	MPa	ASTM D638
fracture	38.2	MPa	ASTM D638
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus
23℃	785	MPa	ASTM D747

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.