| About |
|---|
| 286 provides a flexible base resin for hot melt adhesives, sealants and coatings. 286 exhibits wax compatibility and can be formulated into a wide range of systems. This product promotes higher temperature performance as well as adhesion to a variety of substrates. 286 contains a stabilizing additive package and can also be used in compounded products where high filler loadings are required.&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Good bond,Copolymer,Good stability,Heat Stabilized |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.948 to 0.952 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 5.0 to 7.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 28.0 | wt% | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 71.0 | ℃ | ASTM D3417 |
| Ring and Ball Softening Point | 140 to 145 | ℃ | ASTM E28 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 75 to 80 | ASTM D2240 | |
| Tensile modulus | |||
| 1% secant | 17.2 to 20.0 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 15.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 730 to 780 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |