| About |
|---|
| Product Description TOPAS 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures. Selected Applications Microfluidics Microplates and biochips Labware Optics Cuvettes Electronics Healthcare and food contact Leading Attributes Exceptional mold detail replication; machinable Heat and chemical resistant, clarity and purity Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity More UV transparent than most resins (see 8007X10) Low dielectric constant, thermoplastic Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013L-10 – lubricated version for greater processing versatility TOPAS 6013M-07 – broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 – higher heat distortion temperature (150°C) for 134°C protocols&& |
| Product Description | |
|---|---|
| Supplier | Polyplastics |
| Generic | COC |
| Material Status | Commercial: Active |
| Features | Good Clarity,Low extract,High purity,High liquidity,Machinable,Food contact compliance,High Heat Resistance,Moisture resistance,Radiation disinfection,Copolymer,Solvent resistance,Ethylene oxide disinfection,Amorphous,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 260℃，2.16kg | 44 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 260℃，2.16 kg | 48.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.10 to 0.50 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.010 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3200 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| yield | 46.0 | MPa | ISO 527-2/1A/50 |
| Tensile strain | |||
| yield | 1.7 | % | ISO 527-2/1A/50 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 1.6 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 13 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 127 | ℃ | ISO 75-2/B |
| Glass transition temperature | 134 | ℃ | ISO 11357-2 |
| Vicat Softening Temp | |||
| B50 | 135 | ℃ | ISO 306 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+16 | ohms·cm | IEC 60093 |
| Relative permittivity | IEC 60250 | ||
| 1 kHz | 2.35 | IEC 60250 | |
| 10 kHz | 2.35 | IEC 60250 | |
| Compared to the leakage tracing index | > 600 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.530 | ISO 489 | |
| Transmittance | 91.0 | % | ISO 13468-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Barrel rear temperature | 230 to 260 | °C | |
| Barrel middle temperature | 240 to 280 | °C | |
| Barrel front temperature | 260 to 290 | °C | |
| Nozzle temperature | 240 to 300 | °C | |
| Processing (melt) temperature | 240 to 300 | °C | |
| Mold temperature | 95 to 125 | °C | |
| Injection pressure | 50.0 to 110 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Dependent on processing conditions and part design. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |