| About |
|---|
| Product Description TOPAS 8007X10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for diagnostic and analytical products. It transmits ultraviolet light at lower wavelengths than other polymers. Analytical results are more accurate with pure TOPAS COC and its higher UV transmission for more precise analysis in contact with sensitive chemistries. Selected Applications Cuvettes Microplates Biochips Microfluidics Optics High purity applications Healthcare and food contact Leading Attributes UV transparency at low wavelengths Dimensional stability with UV transmission Purity and chemical resistance Exceptional mold detail replication; machinable Clarity, low birefringence, low fluorescence Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007S-04 – standard grade, appropriate for most applications&& |
| Product Description | |
|---|---|
| Supplier | Polyplastics |
| Generic | COC |
| Material Status | Commercial: Active |
| Features | Good Clarity,High purity,Good Dimensional Stability,Machinable,Halogen free,Food contact compliance,Moisture resistance,No BPA,Copolymer,Solvent resistance,Amorphous,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 260℃，2.16kg | 29 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 260℃，2.16 kg | 32.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.10 to 0.30 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.010 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2600 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| yield | 63.0 | MPa | ISO 527-2/1A/50 |
| Tensile strain | |||
| yield | 4.5 | % | ISO 527-2/1A/50 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Water vapor transmittance | |||
| 23℃，85% RH | 0.025 | g·mm/m²/atm/24 hr | DIN 53122 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 20 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 75.0 | ℃ | ISO 75-2/B |
| Glass transition temperature | 78.0 | ℃ | ISO 11357-2 |
| Vicat Softening Temp | |||
| B50 | 80.0 | ℃ | ISO 306 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+16 | ohms·cm | IEC 60093 |
| Relative permittivity | IEC 60250 | ||
| 1 kHz | 2.35 | IEC 60250 | |
| 10 kHz | 2.35 | IEC 60250 | |
| Compared to the leakage tracing index | > 600 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.530 | ISO 489 | |
| Transmittance | 91.0 | % | ISO 13468-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 50 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Barrel rear temperature | 190 to 220 | °C | |
| Barrel middle temperature | 200 to 240 | °C | |
| Barrel front temperature | 220 to 250 | °C | |
| Nozzle temperature | 220 to 250 | °C | |
| Processing (melt) temperature | 190 to 250 | °C | |
| Mold temperature | 40 to 70 | °C | |
| Injection pressure | 50.0 to 110 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Dependent on processing conditions and part design. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |