| About |
|---|
| Homopolymer Characteristics: Processability Stiffness Applications General injection&& |
| Product Description | |
|---|---|
| Supplier | Hyosung |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Homopolymer,Excellent Processability,Good Rigidity,Ultra high liquidity,high-rigidity |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 23 | g/10min | ASTM D1238 |
| Density | 0.9 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched Izod Impact Strength | |||
| 23℃ | 3 | kg·cm/cm | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched Izod Impact Strength | |||
| 0.45 MPa, unannealed | 110 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield | 370 | kg/cm² | ASTM D638 |
| Flexural Modulus | 16500 | kg/cm² | ASTM D790 |
| R-level | 100 | ASTM D785 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |