Topilene® J801

About
Characteristics: Transparency High Stiffness USP class VI FDA DMF 21499 Applications: Disposable syringe (Barrel) Transparent Product&&

Product Description
Supplier	Hyosung
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Homopolymer
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Bending modulus
23℃	1620	MPa	ASTM D790

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
0.75mm	HB		UL-94

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	34	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.