Topilene® R530

About
Characteristics: Transparency FDA DMF 21499 USP Class VI SFDA Applications: IV bottle&&

Product Description
Supplier	Hyosung
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Homopolymer
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	6.0	g/10min	ASTM D1238
Density	0.900	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Bending modulus	932	MPa	ASTM D790
tensile strength
yield	27.5	MPa	ASTM D638
Rockwell hardness
R	85	R	ASTM D-785

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	59	J/m	ASTM D256

Process Conditions
	Nominal value	Unit	Test method
drying temperature	80 to 100	°C
Drying time	2.0 to 4.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.