| About |
|---|
| Torayca® A630T-30V is a Polyphenylene Sulfide (PPS) product filled with 30% carbon fiber. It is available in Asia Pacific, Europe, or North America. Applications of Torayca® A630T-30V include appliances, electrical/electronic applications and housings. Characteristics include: Flame Rated Flame Retardant&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Material Status | Commercial: Active |
| Features | V-0 |
| Availabilitys | Asia Pacific,North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.46 | g/cm³ | ISO 1183 |
| Molding shrinkage | Internal Method | ||
| TD：3.0 mm | 0.50 | % | Internal Method |
| MD：3.0 mm | 0.10 | % | Internal Method |
| PV Limit | Suzuki Method | ||
| vs. S45C | 1.4 | MPa·m/s | Suzuki Method |
| vs. SUS | 1.5 | MPa·m/s | Suzuki Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| 23℃ | 236 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK, 23 ℃ | 1.4 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23℃ | 27800 | MPa | ISO 178 |
| Flexural Strength | |||
| 23℃ | 342 | MPa | ISO 178 |
| Wear amount | Suzuki Method | ||
| vs. S45C | 0.300 | mg/hr | Suzuki Method |
| vs. SUS | 0.100 | mg/hr | Suzuki Method |
| Frictional coefficient | Suzuki Method | ||
| vs. S45C | 0.29 | Suzuki Method | |
| vs. SUS | 0.080 | Suzuki Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 5.8 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed | 260 | ℃ | ISO 75-2/A |
| Melting temperature | 278 | ℃ | DSC |
| Coeff. of linear thermal expansion | |||
| MD | 1.5E-5 | 1/℃ | ISO 11359-2 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistance | 10 | ohms·cm | IEC 60093 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | V-0 | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3mm |
| 3. 1MPa, 0.33 m/s |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |