| About |
|---|
| Torelina® A310MX04 is a Polyphenylene Sulfide (PPS) product filled with 65% glassmineral. It is available in Asia Pacific, Europe, or North America. Applications of Torelina® A310MX04 include automotive and business/office goods. Primary characteristic: flame rated.&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.97 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24hr | 0.02 | % | ISO 62 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | > 260 | ℃ | ISO 75-2/Af |
| Melting temperature | 278 | ℃ | ISO 11357-3 |
| Vicat Softening Temp | |||
| Linear coefficient of thermal expansion | |||
| MD | 1.7E-5 | 1/℃ | ISO 11359-2 |
| TD | 2.4E-5 | 1/℃ | ISO 11359-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volumetric resistance | 1.0E+19 | Ω.cm | IEC 60093 |
| Insulation strength | |||
| 19 | KV/mm | IEC 60243-1 | |
| Dielectric constant | |||
| 23℃ | 5.1 | 1 MHz | IEC 60250 |
| Dissipation factor | |||
| 23℃ | 2.0E-3 | 1 MHz | IEC 60250 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.36mm | V-0 | UL 94 | |
| 0.74mm | V-0 | UL 94 | |
| 1.50mm | V-0 | UL 94 | |
| 3.00mm | V-0 | UL 94 | |
| 2.00mm | V-0，5VA | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 18 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 8.0 | kJ/m² | ISO 179/1eA |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 123 | R 级 | ISO 2039-2 |
| tensile strength | |||
| 23℃ | 130 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 0.8 | % | ISO 527-2 |
| bending strength | |||
| 23℃ | 210 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 22000 | MPa | ISO 178 |
| shear strength | |||
| 60 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3mm |
| 3. vs. Metal |
| 4. 60% RH |
| 5. 98 MPa |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |