| About |
|---|
| Torelina® A504FG1是一种聚苯硫醚(PPS)产品,含有的填充物为40% 玻璃纤维增强材料。 它,在北美洲、欧洲或亚太地区有供货。 特性包括: 阻燃/额定火焰 高流动性&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Material Status | Commercial: Active |
| Features | V-0,High liquidity |
| Availabilitys | North America,Europe,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.66 | g/cm³ | ISO 1183 |
| Shrinkage rate | Internal Method | ||
| TD：3.0 mm | 0.80 | % | Internal Method |
| MD：3.0 mm | 0.20 | % | Internal Method |
| Water absorption rate | |||
| 23℃，24hr | 0.020 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 10 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| 23℃ | 30 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 260 | ℃ | ISO 75-2/A |
| Melting temperature | 278 | ℃ | ISO 11357-3 |
| Linear coefficient of thermal expansion | |||
| TD | 3.1E-5 | 1/℃ | ISO 11359-2 |
| MD | 2.3E-5 | 1/℃ | ISO 11359-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Dielectric strength | 22 | kV/mm | IEC 60243-1 |
| Dielectric constant | |||
| 23 ℃，1 MHz | 3.60 | IEC 60250 | |
| Dissipation factor | |||
| 23℃，1 MHz | 2.0E-3 | IEC 60250 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.28 mm | V-0 | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Rod flow length | |||
| 320℃，1.00 mm | 200 | mm | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 165 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 1.4 | % | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 15500 | MPa | ISO 178 |
| bending strength | |||
| 23℃ | 250 | MPa | ISO 178 |
| shear strength | |||
| 23℃ | 75.0 | MPa | JIS K7214 |
| friction coefficient | 0.25 | ||
| Taber abraser | |||
| 1000 cycles | 50.0 | mg | ISO 9352 |
| Rockwell hardness | |||
| R-level | 123 | ISO 2039-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |