TOTAL Polyethylene Aceso® PEM 1870

About
Aceso® PEM 1870 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the coating of paper, paperboard or aluminium as well as for the injection moulding process. Aceso® PEM 1870 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging. However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations. Application examples: coating of paper, paperboard, aluminium.&&

About

Aceso® PEM 1870 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the coating of paper, paperboard or aluminium as well as for the injection moulding process. Aceso® PEM 1870 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging. However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations. Application examples: coating of paper, paperboard, aluminium.&&

Product Description
Supplier	TOTAL
Generic	LDPE
Material Status	Commercial: Active
Features	Low density
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	7.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	170	MPa	ISO 527-2
tensile strength
fracture	12.0	MPa	ISO 527-2
yield	9.00	MPa	ISO 527-2
Tensile strain
fracture	450	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	90.0	℃	ISO 306
Melting temperature	108	℃	ISO 11357-3

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	200 to 320	°C
Nozzle temperature	260 to 320	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.