| About |
|---|
| Bio TPSeal® 1350_05 is based on a new generation metallocene Polyethylene with hexene as comonomer. Bio TPSeal® 1350_05 also contains a significant level of PolyLactic Acid (PLA) which brings outstanding properties to the final product. Bio TPSeal® 1350_05 is a natural or coloured Specialty Compound, provided preferably under a powder form (it can also be pellets). It is suitable for use in Rotational Moulding. Main Characteristics Suitable for monolayer and multi-layer with foam technology. Application Very high Stiffness applications.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | mPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Hexene copolymers |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | > 0.955 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 4.50 mm, roll formed | 1350 | MPa | ISO 527-2/1B |
| Tensile strain | |||
| Fracture, 4.50 mm, roll formed | 10 | % | ISO 527-2/1B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Multi axis instrument impact energy | |||
| -20 ℃, 4.50 mm, roll forming, Total Penestration Energy | 25.0 | J | ISO 6603-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |