TOTAL Polyethylene HDPE 53090

About
HDPE 53090 is a semi high molecular weight (SHMW) high density polyethylene (HDPE) with high resistance to impact, rigidity and good Environmental Stress Crack Resistance (ESCR). It has been specifically designed for the manufacture of blow moulded articles (open top drums and jerry-cans) dedicated for the transportation of dangerous goods. HDPE 53090 is a pellet grade and contains antioxidants.&&

About

HDPE 53090 is a semi high molecular weight (SHMW) high density polyethylene (HDPE) with high resistance to impact, rigidity and good Environmental Stress Crack Resistance (ESCR). It has been specifically designed for the manufacture of blow moulded articles (open top drums and jerry-cans) dedicated for the transportation of dangerous goods. HDPE 53090 is a pellet grade and contains antioxidants.&&

Product Description
Supplier	TOTAL
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Inoxidizability,High molecular weight,High density,High ESCR
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.953	g/cm³	ISO 1183
Melt Flow Rate
190℃，21.6kg	9.0	g/10min	ISO 1133
Full incision creep test	10.0	hr	ISO 16770

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
-30℃	20	kJ/m²	ISO 179

Supplementary information	Nominal value	Unit	Test method
Blowing molding temperature	180 to 220	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.