| About |
|---|
| HDPE 8183: Medium molecular weight, Narrow molecular weight distribution, high gloss surface, excellent mold release, ASTM D1248 Type III, Class A, Category 4, Drug Master File listed, USP Class VI approved, FDA compliant Applications: Cosmetic bottles, pharmaceutical bottles, industrial product containers, chemical packaging, suitable for food packaging.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | MMW-HDPE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good stripping performance,Food contact compliance,Weight distribution,High density |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.945 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 0.55 | g/10min | ASTM D1238 |
| 190℃，21.6kg | 19 | g/10min | ASTM D1238 |
| 190℃，5.0kg | 1.9 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent | 200 | hr | ASTM D1693B |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Melting peak temperature | 129 | ℃ | ASTM D3417 |
| Linear coefficient of thermal expansion | |||
| MD | 1.8E-4 | 1/℃ | ASTM D696 |
| Hot deformation temperature | 70 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 62 | ASTM D2240 | |
| Tensile modulus | |||
| 2% secant | 758 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 22.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 965 | MPa | ASTM D790 |
| Rockwell hardness | |||
| Level L | 41 | ASTM D785 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |