TOTAL Polyethylene HDPE MS 201 BN-NA (US)

About
HDPE MS201 BN-NA: Good melt strength, excellent impact and creep resistance, excellent stress, cracking resistance, GMP.PE.062 certification Applications: Automotive fuel tanks&&

Product Description
Supplier	TOTAL
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,High molecular weight,Good melt strength,High density,High ESCR
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.946	g/cm³	ISO 1183
Melt Flow Rate
190℃，21.6kg	6.0	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, F50	> 1000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	24.0	MPa	ISO 527-2/50
Tensile strain
fracture	> 600	%	ISO 527-2/50
Bending modulus
0.4% secant	1100	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	640	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	127	℃	ASTM D3417

Supplementary information	Nominal value	Unit	Test method
Blowing molding temperature	188 to 232	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.