| About |
|---|
| High Molecular Weight Bimodal Pipe Resin PPI TR4 designation PE100 / PE4710 / PE3408 Characteristics Outstanding high temperature creep rupture strength Exceptional slow crack growth resistance Excellent resistance to rapid crack propagation NSF certified to D2513 (gas), CSA B137.4 (gas), CSA B137.1 (water) and CSA C448 (geothermal) NSF Standard 14/61 Certified FDA Compliant Applications Gas distribution Potable water Geothermal Industrial and mining Sewer and sewer relining Gas and oil gathering General pipe relining Pipe Coating&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | High molecular weight,Good tear strength,High density,Bimodal molecular weight distribution |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 7.5 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, molding | > 24.1 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | > 800 | % | ASTM D638 |
| Bending modulus | |||
| Cutting and molding | 1030 | MPa | ASTM D790 |
| Notch Pipe Test | > 20.8 | day | ISO 13479 |
| Resistance to rapid crack propagation | |||
| Pc，0℃ | > 12.0 | bar | ISO 13477 |
| Fundamentals of Hydrostatic Design | ASTM D2837 | ||
| 23℃ | 11.0 | MPa | |
| 60℃ | 6.89 | MPa |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm, molded into shape | 430 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -118 | ℃ | ASTM D746 |
| Vicat Softening Temp | 124 | ℃ | ASTM D1525 |
| Melting peak temperature | 131 | ℃ | ASTM D3417 |
| Linear coefficient of thermal expansion | |||
| MD | 1.0E-4 | 1/℃ | ASTM D696 |
| Hot deformation temperature | 78 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Minimum Required Strength | 10.0 | MPa | ISO 9080 |
| Slow crack propagation PENT – molding | > 5000 | ASTM F1473 | |
| Pipe Test Category | C3 | ASTM D2239 | |
| Unit classification | 445574 445576 | ASTM D3350 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |