TOTAL Polyethylene Lumicene® M 2310 EP

About
Lumicene® mPE M 2310 EP is a second generation metallocene based Linear Low Density Polyethylene with hexene as comonomer. Lumicene® mPE M 2310 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control and in comparison with conventional LLDPE and first generation metallocene based polyethylene. Lumicene® mPE M 2310 EP is especially dedicated to film applications where superior optical properties in combination with excellent impact resistance (even at low temperature) and sealing strength are required, particularly in blend and coextrusion with LLDPE or LDPE. Lumicene® mPE M 2310 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, deep freeze, collation shrink and lamination.&&

About

Lumicene® mPE M 2310 EP is a second generation metallocene based Linear Low Density Polyethylene with hexene as comonomer. Lumicene® mPE M 2310 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control and in comparison with conventional LLDPE and first generation metallocene based polyethylene. Lumicene® mPE M 2310 EP is especially dedicated to film applications where superior optical properties in combination with excellent impact resistance (even at low temperature) and sealing strength are required, particularly in blend and coextrusion with LLDPE or LDPE. Lumicene® mPE M 2310 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, deep freeze, collation shrink and lamination.&&

Product Description
Supplier	TOTAL
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	High impact resistance,Optical performance,Good Gauge Control,Inoxidizability,Low density,low-temperature impact resistance,Hexene copolymers
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.923	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.90	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
tensile strength			ISO 527-3
MD, yield, 40 µ m, blow molded film	12.0	MPa	ISO 527-3
TD, yield, 40 µ m, blow molded film	12.0	MPa	ISO 527-3
tensile strength			ISO 527-3
MD, fracture, 40 µ m, blow molded film	59.0	MPa	ISO 527-3
TD, fracture, 40 µ m, blow molded film	58.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 40 µ m, blow molded film	650	%	ISO 527-3
TD, fracture, 40 µ m, blow molded film	740	%	ISO 527-3
Drop hammer impact
40 µ m, blow molded film	310	g	ISO 7765-1
Elmandorf tear strength			ISO 6383-2
MD: 40 µ m, blow molded film	80	N	ISO 6383-2
TD: 40 µ m, blow molded film	170	N	ISO 6383-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	114	℃	ISO 306
Melting temperature	116	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45 °, 40.0 µ m, blow molded film	73		ASTM D2457
Haze
40 µ m, blow molded film	5.5	%	ISO 14782

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.