TOTAL Polyethylene Lumicene® M 2710 EP (EU)

About
Lumicene® mPE M 2710 EP is a second generation metallocene based Low Density Polyethylene with hexene as comonomer. Lumicene® mPE M 2710 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The combination of these features brings a significant downgauging potential. Lumicene® mPE M 2710 EP is especially dedicated to film applications where high gloss and high transparency are required, particularly in blend and in coextrusion with LLDPE or LDPE. Lumicene® mPE M 2710 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, deep freeze, collation shrink and lamination.&&

About

Lumicene® mPE M 2710 EP is a second generation metallocene based Low Density Polyethylene with hexene as comonomer. Lumicene® mPE M 2710 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The combination of these features brings a significant downgauging potential. Lumicene® mPE M 2710 EP is especially dedicated to film applications where high gloss and high transparency are required, particularly in blend and in coextrusion with LLDPE or LDPE. Lumicene® mPE M 2710 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, deep freeze, collation shrink and lamination.&&

Product Description
Supplier	TOTAL
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Good Gauge Control,Inoxidizability,Low density,Hexene copolymers
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.927	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.90	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
tensile strength			ISO 527-3
MD, yield, 40 µ m, blow molded film	13.5	MPa	ISO 527-3
TD, yield, 40 µ m, blow molded film	14.0	MPa	ISO 527-3
tensile strength			ISO 527-3
MD, fracture, 40 µ m, blow molded film	51.0	MPa	ISO 527-3
TD, fracture, 40 µ m, blow molded film	48.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 40 µ m, blow molded film	650	%	ISO 527-3
TD, fracture, 40 µ m, blow molded film	720	%	ISO 527-3
Drop hammer impact
40 µ m, blow molded film	200	g	ISO 7765-1
Elmandorf tear strength			ISO 6383-2
MD: 40 µ m, blow molded film	60	N	ISO 6383-2
TD: 40 µ m, blow molded film	160	N	ISO 6383-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	118	℃	ISO 306
Melting temperature	119	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45 °, 40.0 µ m, blow molded film	70		ASTM D2457
Haze
40 µ m, blow molded film	6.5	%	ISO 14782

Supplementary information	Nominal value	Unit	Test method
Blown Film Melt Temperature	180 to 260	℃

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.