TOTAL Polyethylene Lumicene® M 3410 EP (EU - Blown Film)

About
Lumicene® mPE M 3410 EP is a second generation metallocene based Medium Density Polyethylene with hexene as comonomer. Lumicene® mPE M 3410 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The combination of these features brings a significant downgauging potential. Lumicene® mPE M 3410 EP is especially dedicated to film applications where high gloss and high transparency are required, particularly in blend and in coextrusion with LLDPE or LDPE. Lumicene® mPE M 3410 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as collation shrink, mailing film, heavy-duty sacks, bags, lamination and hygiene film.&&

About

Lumicene® mPE M 3410 EP is a second generation metallocene based Medium Density Polyethylene with hexene as comonomer. Lumicene® mPE M 3410 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The combination of these features brings a significant downgauging potential. Lumicene® mPE M 3410 EP is especially dedicated to film applications where high gloss and high transparency are required, particularly in blend and in coextrusion with LLDPE or LDPE. Lumicene® mPE M 3410 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as collation shrink, mailing film, heavy-duty sacks, bags, lamination and hygiene film.&&

Product Description
Supplier	TOTAL
Generic	mMDPE
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Good Gauge Control,Inoxidizability,Hexene copolymers
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.934	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.90	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
tensile strength
MD, yield, 40 µ m, blow molded film	17.0	MPa
TD, yield, 40 µ m, blow molded film	18.0	MPa
MD, fracture, 40 µ m, blow molded film	47.0	MPa
TD, fracture, 40 µ m, blow molded film	43.0	MPa
Tensile strain
MD, fracture, 40 µ m, blow molded film	630	%
TD, fracture, 40 µ m, blow molded film	700	%
Drop hammer impact
40 µ m, blow molded film	100	g	ISO 7765-1
Elmandorf tear strength
MD: 40 µ m, blow molded film	20	N
TD: 40 µ m, blow molded film	100	N

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	123	℃	ISO 306
Melting temperature	124	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45 °, 40.0 µ m, blow molded film	60		ASTM D2457
Haze
40 µ m, blow molded film	9.0	%	ISO 14782

Supplementary information	Nominal value	Unit	Test method
Blown Film Melt Temperature	180 to 230

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.