| About |
|---|
| Lumicene® mPE M 4041 UV is a new generation metallocene medium density polyethylene (mMDPE) with hexene as comonomer. Lumicene® mPE M 4041 UV is intended for the manufacture of large rotomoulded items. Lumicene® mPE M 4041 UV is a natural grade available in pellets form.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Hexene copolymers |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-2 | ||
| yield | 21.0 | MPa | ISO 527-2 |
| fracture | 21.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 11 | % | ISO 527-2 |
| fracture | 800 | % | ISO 527-2 |
| Bending modulus | 730 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | > 150 | kJ/m² | ISO 179 |
| 23℃ | > 150 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 126 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |