TOTAL Polyethylene Lumicene® M 4707 EP

About
Lumicene® mPE M 4707 EP is a second generation metallocene based High Density Polyethylene with hexene as comonomer. Lumicene® mPE M 4707 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The combination of these features brings a significant downgauging potential. Lumicene® mPE M 4707 EP is especially dedicated to film applications where high gloss and high transparency are required, particularly in blend and in coextrusion with LLDPE or LDPE. Lumicene® mPE M 4707 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, heavy-duty sacks, automatic packaging, mailing film and lamination.&&

About

Lumicene® mPE M 4707 EP is a second generation metallocene based High Density Polyethylene with hexene as comonomer. Lumicene® mPE M 4707 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The combination of these features brings a significant downgauging potential. Lumicene® mPE M 4707 EP is especially dedicated to film applications where high gloss and high transparency are required, particularly in blend and in coextrusion with LLDPE or LDPE. Lumicene® mPE M 4707 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, heavy-duty sacks, automatic packaging, mailing film and lamination.&&

Product Description
Supplier	TOTAL
Generic	HDPE
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.947	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.70	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
tensile strength			ISO 527-3
MD, yield, 40 µ m, blow molded film	24.0	MPa	ISO 527-3
TD, yield, 40 µ m, blow molded film	25.0	MPa	ISO 527-3
tensile strength			ISO 527-3
MD, fracture, 40 µ m, blow molded film	39.0	MPa	ISO 527-3
TD, fracture, 40 µ m, blow molded film	38.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 40 µ m, blow molded film	610	%	ISO 527-3
TD, fracture, 40 µ m, blow molded film	750	%	ISO 527-3
Drop hammer impact
40 µ m, blow molded film	80	g	ISO 7765-1
Elmandorf tear strength			ISO 6383-2
MD: 40 µ m, blow molded film	10	N	ISO 6383-2
TD: 40 µ m, blow molded film	60	N	ISO 6383-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	130	℃	ISO 306
Melting temperature	131	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45 °, 40.0 µ m, blow molded film	50		ASTM D2457
Haze
40 µ m, blow molded film	14	%	ISO 14782

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.