| About |
|---|
| Lumicene® mPE M5220 is a High Density Polyethylene with outstanding organoleptic properties, stress-cracking and process-ability. Lumicene® mPE M5220 is especially suited for the production of packaging of sterilized milk by extrusion blow moulding.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | mHDPE |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Good sensory characteristics.,High density,High ESCR |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% emulsifier, F50 | > 200 | hr | ASTM D1693B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 10 | kJ/m² | ISO 179 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |