TOTAL Polyethylene Lumicene® M 5510 EP

About
Lumicene® mPE M5510 EP is a second generation metallocene high density homopolymer Polyethylene. Lumicene® mPE M5510 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The outstanding stiffness combined with good optical properties brings a significant down-gauging potential. The high density of Lumicene® mPE M5510 EP enables its use in applications with moisture barrier requirements, such as dry food packaging, and brings improved heat resistance, compared to commonly used HDPE. Lumicene® mPE M5510 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, heavy-duty sacks, automatic packaging specialty film, mailing film and lamination.&&

About

Lumicene® mPE M5510 EP is a second generation metallocene high density homopolymer Polyethylene. Lumicene® mPE M5510 EP can be processed at high output rates with low extrusion pressure, excellent bubble stability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The outstanding stiffness combined with good optical properties brings a significant down-gauging potential. The high density of Lumicene® mPE M5510 EP enables its use in applications with moisture barrier requirements, such as dry food packaging, and brings improved heat resistance, compared to commonly used HDPE. Lumicene® mPE M5510 EP is suited for many applications in the field of consumer, industrial, food or hygiene packaging such as bags, heavy-duty sacks, automatic packaging specialty film, mailing film and lamination.&&

Product Description
Supplier	TOTAL
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Optical performance,Good Gauge Control,Moisture resistance,Inoxidizability,High density,Homopolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	1.2	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
tensile strength			ISO 527-3
MD, yield, 40 µ m, blow molded film	27.5	MPa	ISO 527-3
TD, yield, 40 µ m, blow molded film	28.0	MPa	ISO 527-3
tensile strength			ISO 527-3
MD, fracture, 40 µ m, blow molded film	57.0	MPa	ISO 527-3
TD, fracture, 40 µ m, blow molded film	45.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 40 µ m, blow molded film	870	%	ISO 527-3
TD, fracture, 40 µ m, blow molded film	910	%	ISO 527-3
Drop hammer impact
40 µ m, blow molded film	100	g	ISO 7765-1
Elmandorf tear strength			ISO 6383-2
MD: 40 µ m, blow molded film	11	N	ISO 6383-2
TD: 40 µ m, blow molded film	90	N	ISO 6383-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	133	℃	ISO 306
Melting temperature	134	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45 °, 40.0 µ m, blow molded film	40		ASTM D2457
Haze
40 µ m, blow molded film	24	%	ISO 14782

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	200 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.