| About |
|---|
| MDPE HF 513 is a medium density polyethylene produced by slurry loop low pressure process with hexene as co-monomer. MDPE HF 513 is a semi-high molecular weight polyethylene giving excellent mechanical properties. It shows a broad molecular weight distribution ensuring outstanding processability. MDPE HF 513 can be used alone, blended or coextruded in a wide variety of blown film applications : consumer, industrial, food or hygiene packaging.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Wide molecular weight distribution,Inoxidizability,High molecular weight,Hexene copolymers |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.934 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 0.15 | g/10min | ISO 1133 |
| 190℃，21.6kg | 15 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 620 | MPa | ISO 178 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 20 40 | µm | |
| tensile strength | ISO 527-3 | ||
| MD, yield, 20 µ m, blow molded film | 20.0 | MPa | ISO 527-3 |
| TD, yield, 20 µ m, blow molded film | 19.0 | MPa | ISO 527-3 |
| MD, yield, 40 µ m, blow molded film | 18.0 | MPa | ISO 527-3 |
| TD, yield, 40 µ m, blow molded film | 18.0 | MPa | ISO 527-3 |
| tensile strength | ISO 527-3 | ||
| MD, fracture, 20 µ m, blow molded film | 65.0 | MPa | ISO 527-3 |
| TD, fracture, 20 µ m, blow molded film | 52.0 | MPa | ISO 527-3 |
| MD, fracture, 40 µ m, blow molded film | 55.0 | MPa | ISO 527-3 |
| TD, fracture, 40 µ m, blow molded film | 52.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, fracture, 20 µ m, blow molded film | 400 | % | ISO 527-3 |
| TD, fracture, 20 µ m, blow molded film | 500 | % | ISO 527-3 |
| MD, fracture, 40 µ m, blow molded film | 540 | % | ISO 527-3 |
| TD, fracture, 40 µ m, blow molded film | 620 | % | ISO 527-3 |
| Drop hammer impact | ISO 7765-1 | ||
| 20 µ m, blow molded film | 220 | g | ISO 7765-1 |
| 40 µ m, blow molded film | 290 | g | ISO 7765-1 |
| Elmandorf tear strength | ISO 6383-2 | ||
| MD: 20 µ m, blow molded film | 11 | N | ISO 6383-2 |
| TD: 20 µ m, blow molded film | 140 | N | ISO 6383-2 |
| MD: 40 µ m, blow molded film | 24 | N | ISO 6383-2 |
| TD: 40 µ m, blow molded film | 190 | N | ISO 6383-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 118 | ℃ | ISO 306 |
| Melting temperature | 125 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 190 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |