TOTAL Polypropylene PPC 13442

About
Polypropylene PPC 13442 is a nucleated antistatic heterophasic copolymer with a very high Melt Flow Index of 100 g/10 min. Polypropylene PPC 13442 is characterized by very high fluidity with good mechanical properties. It has been formulated for excellent antistatic properties. Polypropylene PPC 13442 has been developed for high speed injection moulding of thin walled packaging containers and specifically household articles. We hereby confirm that we do not use peroxide in the manufacturing of the above-mentioned Product.&&

About

Polypropylene PPC 13442 is a nucleated antistatic heterophasic copolymer with a very high Melt Flow Index of 100 g/10 min. Polypropylene PPC 13442 is characterized by very high fluidity with good mechanical properties. It has been formulated for excellent antistatic properties. Polypropylene PPC 13442 has been developed for high speed injection moulding of thin walled packaging containers and specifically household articles. We hereby confirm that we do not use peroxide in the manufacturing of the above-mentioned Product.&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High liquidity,Nucleation,Antistatic property,Impact copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Apparent density	0.53	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	100	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	4.0	kJ/m²	ISO 179
Impact strength of cantilever beam notch
23℃	4.0	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	60.0	℃	ISO 75-2/A
0.45 MPa, unannealed	114	℃	ISO 75-2/B
Vicat Softening Temp
A50	150	℃	ISO 306/A50
B50	80.0	℃	ISO 306
Melting temperature
DSC	165	℃	ISO 3146

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1600	MPa	ISO 527-2
tensile strength
yield	30.0	MPa	ISO 527-2
Tensile strain
yield	5.0	%	ISO 527-2
Bending modulus	1600	MPa	ISO 178
Rockwell hardness
R-level	100		ISO 2039-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.