TOTAL Polypropylene PPC 9612

About
Polypropylene PPC 9612 S02 has been developed specifically for the injection moulding of crates and is characterized by a high Melt Flow Index of 20 g/10 min. It allows an optimization of the injection parameters as for example a reduction of the cycle time, while keeping the keys properties for crates, namely rigidity, impact (at cold temperature) and long term creep resistance. Other injection molding applications like pails, food packaging, lids could benefit from this outstanding properties combination.&&

About

Polypropylene PPC 9612 S02 has been developed specifically for the injection moulding of crates and is characterized by a high Melt Flow Index of 20 g/10 min. It allows an optimization of the injection parameters as for example a reduction of the cycle time, while keeping the keys properties for crates, namely rigidity, impact (at cold temperature) and long term creep resistance. Other injection molding applications like pails, food packaging, lids could benefit from this outstanding properties combination.&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,High impact resistance,High liquidity,low-temperature impact resistance,Impact copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Apparent density	0.53	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	20	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180
-20℃	6.5	kJ/m²	ISO 180
23℃	12	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	48.0	℃	ISO 75-2/A
0.45 MPa, unannealed	90.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	140	℃	ISO 306/A50
B50	70.0	℃	ISO 306
Melting temperature
DSC	165	℃	ISO 3146

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1250	MPa	ISO 527-2
tensile strength
yield	24.0	MPa	ISO 527-2
Tensile strain
yield	5.0	%	ISO 527-2
Bending modulus	1200	MPa	ISO 178
Rockwell hardness
R-level	82		ISO 2039-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.