TOTAL Polypropylene PPH 3622

About
Total Petrochemicals Polypropylene 3622 is engineered for good processability in thin wall multi-cavity molds. 3622 has good contact/see-through clarity, and is easily printed with silk screen or hot stamping techniques. 3622 complies with all applicable FDA regulations and may be used under those provisions for food contact applications. Recommended for the injection molding of house wares, utility boxes and containers, as well as general purpose extrusion.&&

About

Total Petrochemicals Polypropylene 3622 is engineered for good processability in thin wall multi-cavity molds. 3622 has good contact/see-through clarity, and is easily printed with silk screen or hot stamping techniques. 3622 complies with all applicable FDA regulations and may be used under those provisions for food contact applications. Recommended for the injection molding of house wares, utility boxes and containers, as well as general purpose extrusion.&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good Printability,Food contact compliance,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	32	J/m	ASTM D256-A
Notched impact strength of cantilever beam
23℃	960	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	121	℃	ASTM D648
Melting temperature	166	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	103		ASTM D785
Tensile modulus	1520	MPa	ASTM D638
tensile strength
yield	33.1	MPa	ASTM D638
Tensile strain
yield	11	%	ASTM D638
Bending modulus	1520	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	200 to 232	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.