TOTAL Polypropylene PPH 3721WZ

About
Polypropylene 3721WZ is designed with high flow characteristics for ease of filling thin wall parts. Antistat: 3721WZ is engineered with a high level of antistat for shelf cleanliness and mold release. FDA: 3721WZ complies with all applicable FDA regulations for food contact applications. Nucleation: 3721WZ is nucleated to provide fast cycle time and improve contact clarity in thin wall, multi-cavity molds. Applications: 3721WZ is ideal for caps, closures, cutlery, and other thin wall multi-cavity applications. Processing: 3721WZ processes on conventional injection molding equipment with typical melt temperatures of 390°-450°F (200-232°C).&&

About

Polypropylene 3721WZ is designed with high flow characteristics for ease of filling thin wall parts. Antistat: 3721WZ is engineered with a high level of antistat for shelf cleanliness and mold release. FDA: 3721WZ complies with all applicable FDA regulations for food contact applications. Nucleation: 3721WZ is nucleated to provide fast cycle time and improve contact clarity in thin wall, multi-cavity molds. Applications: 3721WZ is ideal for caps, closures, cutlery, and other thin wall multi-cavity applications. Processing: 3721WZ processes on conventional injection molding equipment with typical melt temperatures of 390°-450°F (200-232°C).&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Clarity,High liquidity,Nucleation,Quick molding cycle,Food contact compliance,Antistatic property,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	27	J/m	ASTM D256-A
23℃	1100	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	127	℃	ASTM D648
Melting temperature	158	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1790	MPa	ASTM D638
tensile strength	37.9	MPa	ASTM D638
Tensile strain
fracture	12	%	ASTM D638
Bending modulus	1860	MPa	ASTM D790
Rockwell hardness
R-level	107		ASTM D785

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	200 to 232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.