TOTAL Polystyrene Crystal 585T

About
Polystyrene 585T: Is a high molecular weight, low melt flow, high heat crystal polystyrene. This polymer makes superior foam and oriented polystyrene sheet (OPS). The TOTAL process technology consistently produces low residual product for foam and OPS applications. Application: Foam disposables Insulation foam board OPS disposables General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.&&

About

Polystyrene 585T: Is a high molecular weight, low melt flow, high heat crystal polystyrene. This polymer makes superior foam and oriented polystyrene sheet (OPS). The TOTAL process technology consistently produces low residual product for foam and OPS applications. Application: Foam disposables Insulation foam board OPS disposables General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.&&

Product Description
Supplier	TOTAL
Generic	PS (GPPS)
Material Status	Commercial: Negative
Features	Low liquidity,Low Residuals,High Heat Resistance,High molecular weight,Disposable,HB
Availabilitys	North America
Process Methods	Foam treatment

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³
Melt Flow Rate
200℃，5.0kg	1.6	g/10min	ASTM D1238
Shrinkage rate
MD	0.40 to 0.70	%	ASTM D955
humidity	< 0.10	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2960	MPa	ASTM D638
tensile strength	52.4	MPa	ASTM D638
Bending modulus	2960	MPa	ASTM D790
bending strength	97.9	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	107	℃	ASTM D1525
Hot deformation temperature
annealing	99	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.